After the user Custom Condenser Coils is used, the cooling water in the condenser mostly contains calcium, magnesium ions, and acid carbonate. When cooling water flows over the metal surface, carbonates are formed. In addition, the oxygen dissolved in the cooling water can cause metal corrosion and form rust. Due to the generation of rust, the heat exchange effect of the condenser is reduced. In severe cases, cooling water has to be sprayed outside the shell. In severe cases, the tube will be blocked and the heat exchange effect will be lost. Research data shows that scale deposits have a huge impact on the loss of heat transfer, and the increase in deposits will increase energy costs. Keeping the cooling channel free of mineral deposits can improve efficiency, save energy, extend the service life of the equipment, and save production time and costs.
For a long time, traditional cleaning methods such as mechanical methods (scraping, brushing), high-pressure water, chemical cleaning (pickling), etc. have encountered many problems when cleaning equipment: they cannot completely remove deposits such as scale, and acid causes corrosion to equipment and forms loopholes. , The residual acid will cause secondary corrosion or under-scaling corrosion to the material, which will eventually lead to the replacement of equipment. In addition, the cleaning waste liquid is toxic and requires a lot of money for wastewater treatment.
In response to the above situation, through the Condenser Manufacturer efforts to develop a cleaning agent that is less corrosive to metals, and the current successful research and development of Fu Shi Take cleaning agent. It has the characteristics of high efficiency, environmental protection, safety, and non-corrosion. It not only has a good cleaning effect but also has no corrosion to the equipment, which can ensure the long-term use of the condenser.
