Label for Energy-Efficient Equipment

Filters, coils, and fins need frequent maintenance to keep an air conditioner running smoothly and effectively over its lifespan.

Without regular maintenance, your air conditioner will lose efficiency and use more electricity.

HVAC filters

The single most crucial thing you can do to maintain your air conditioner and keep it running at maximum efficiency is to routinely clean or replace its filters. Filters that are clogged with debris or are unclean decrease airflow, which dramatically lowers system efficiency. It is possible for some air going through the filter to skip it and end up on the evaporator coil, which lowers the coil's option to absorb heat and exacerbates the issue of constrained airflow. It is possible to reduce the energy consumption of your air conditioner by 5 to 15% by replacing a filthy filter with a clean one.

Anywhere along the return ducted air conditioning Brisbane length may have filters installed in a central air conditioning system. Filters are a regular part of air conditioning systems and may be included into the units themselves, the walls, or the ceiling. On the side of the air conditioner that is faced in the room, a filter is often fastened to the grill.

Some filter types may be reused repeatedly, while others need regular replacement. They are available in several configurations, each with a different level of efficiency. Throughout the heating and cooling seasons, the filter or filters in your air conditioner should be cleaned or changed at least once every two months. If your air conditioner is used regularly, it is situated in a dusty area, or you have furry pets, filters may need to be replaced more frequently.

Unclean air conditioner

The evaporator coil and condenser coil of an air conditioner will get dirty after many months or perhaps several years of use. The filter has to be kept clean so that the evaporator coil doesn't become dirty as soon. But with time, the evaporator coil will become more and more dirty. By obstructing airflow and serving as insulation, this filth decreases the coil's efficiency by lowering its capacity to absorb heat. By checking the evaporator coil yearly and cleaning it if required, issues may be prevented.

In dusty conditions or those with adjacent plants, outdoor condenser coils may also get very unclean. It will be easy to see the condenser coil and any dust that may have collected on its fins.

It's crucial to keep the area around the condenser tidy. Dirt and debris may enter via a variety of openings, including the dryer vent, the lawnmower, and falling leaves. By eliminating obstacles, cutting back vegetation by at least two feet (0.6 metres), and cleaning the region directly around the coil, you may improve condenser airflow.

Injured Fins

Evaporator and condenser coils' aluminium fins are prone to bending, which might obstruct airflow. To restore the fins to a condition that is somewhat reminiscent of when they were initially installed, a "fin comb" may be purchased from HVAC wholesalers. For that you would need the Air Conditioning Installation Brisbane services.

Conclusion

To do this, periodically pass a strong wire through the device's drain ports. The unit won't be able to remove excess moisture from the air if the drain channels get clogged, which might result in discoloured walls or carpet.


Alfa Air Electrical

1 Blog posts

Comments