What is the cause of damage to the injection mould? What should I pay attention to? Elaboration of Yuhuan Shengjiu Mould Co., Ltd.
(1) If there are metal inserts in the plastic injection products, when the metal inserts are placed in the mould opening, due to the insecure or skewed placement, the mould cavity will cause local damage, indentation or dents after mould clamping.
(2) Due to the high pressure and fast flow rate of the injected molten material flow, the metal insert is washed down or changed, causing damage to the mould.
(3) Long-term closing action of the parting joint surface of the mould, occasionally impurities are caught in the middle or the sliding part of the template is worn for a long time, which causes the template to run non-parallel, which makes the tightness of the mould joint surface after the mould closes worse, which is easy to appear Problems such as flashing of moulded products seriously affect product quality. At this time, the mould should be inspected and repaired.
Yuhuan Shengjiu Mould Co., Ltd. is a professional China manufacturer and supplier of Syringe Mould and Oxygen Mask Mould . And provide customers with a complete mould configuration program to help and improve the production of disposable medical equipment. According to the requirements of the market and customers, Shengjiu has developed a new type of medical mould with a full hot runner system, and developed a variety of new scientific medical equipment for customers. Welcome to consult and order: https://www.medicalmould.net/
